Translations:Real-time sonification/89/en

1. Install the MIDI Extension for Makecode.
2. Create a very basic program using the MIDI extension to test your setup.
3. Install Hairless MIDI, open it, and from serial port drop-down menu select the com port (USB port) to which the micro:bit is connected to.
4. Install loopMIDI, open it, and click the + button at the bottom-left corner to create a new virtual port.
5. Go back to the HairlessMIDI window and on the MIDI out drop-down menu select loopMIDI port
6. You might need to unplug and plug in the micro:bit again for it to work.
7. You are ready to play!