Sonification in practice - Revision history

David Sousa: Marked this version for translation

2026-04-06T15:03:42Z

Marked this version for translation

David Sousa: Prepared the page for translation

2026-04-06T15:02:50Z

Prepared the page for translation

← Older revision		Revision as of 15:02, 6 April 2026
Line 1:		Line 1:
			<languages/>
			<translate>
	Sonification for educational purposes in practice is a process of exploring every possibility that essentially answers the question: “How can I use sound to highlight or demonstrate one or more pieces of information or conclusions arising from a movement, measurement, or phenomenon that either exists, has occurred, or is unfolding over time?» The existing data at our disposal, the conditions and methods of their collection, as well as the educational purpose for which the sonification is intended, are the determining factors for its effective use.		Sonification for educational purposes in practice is a process of exploring every possibility that essentially answers the question: “How can I use sound to highlight or demonstrate one or more pieces of information or conclusions arising from a movement, measurement, or phenomenon that either exists, has occurred, or is unfolding over time?» The existing data at our disposal, the conditions and methods of their collection, as well as the educational purpose for which the sonification is intended, are the determining factors for its effective use.

	The aspects below shape the relationship between educational needs and the concept of sound along with its structured arrangement over time—that is, the concept of music.		The aspects below shape the relationship between educational needs and the concept of sound along with its structured arrangement over time—that is, the concept of music.


	==Aspects of teaching with Sonification as a musical practice==		==Aspects of teaching with Sonification as a musical practice==
Line 9:		Line 10:

	Thus, we can reasonably distinguish the concept of sonification for educational purposes into three basic approaches:		Thus, we can reasonably distinguish the concept of sonification for educational purposes into three basic approaches:


	'''• The symbolic'''		'''• The symbolic'''
Line 17:		Line 17:
	'''• The adaptive'''		'''• The adaptive'''

			==Symbolic Sonification==

	~~==Symbolic Sonification==~~
	The reproduction of sound characteristics, namely: pitch, intensity, timbre, repetition rate (if any), and duration—which are linked to scientific concepts, terms, and quantities without being logically mapped to a data-set (data-mapping)— constitutes the subject of symbolic sonification.		The reproduction of sound characteristics, namely: pitch, intensity, timbre, repetition rate (if any), and duration—which are linked to scientific concepts, terms, and quantities without being logically mapped to a data-set (data-mapping)— constitutes the subject of symbolic sonification.

	A simple example would be to “sound-paint” a gray cloud using low-frequency noise and a white cloud using high-frequency noise. Another example would be a class of students representing the sound of rain by randomly tapping their fingernails on their desks. Another example that relates composition with music representation is the leitmotif. A leitmotif is a short melodic theme consisting of a few specific notes which, as a unique motif (pattern), is associated with a character in an opera and played by the orchestra, particularly in Wagner’s operas. A character’s leitmotif brings the character to mind throughout the entire work, whether the character is on stage or not! Translating this to a data series, such a leitmotif could replace the expected sound of a prominent low or high value (or a specific value or even a range of values) without having any coherence or arising from the neighboring data.		A simple example would be to “sound-paint” a gray cloud using low-frequency noise and a white cloud using high-frequency noise. Another example would be a class of students representing the sound of rain by randomly tapping their fingernails on their desks. Another example that relates composition with music representation is the leitmotif. A leitmotif is a short melodic theme consisting of a few specific notes which, as a unique motif (pattern), is associated with a character in an opera and played by the orchestra, particularly in Wagner’s operas. A character’s leitmotif brings the character to mind throughout the entire work, whether the character is on stage or not! Translating this to a data series, such a leitmotif could replace the expected sound of a prominent low or high value (or a specific value or even a range of values) without having any coherence or arising from the neighboring data.

			==Mathematical Sonification==

	~~==Mathematical Sonification==~~
	When pitch, intensity, timbre, rhythm (if any), and duration as sound-characteristics, runs through a series of data-measurements connected to a physical term, or a scientific concept, they form a logical map of one or more parts of that series (direct data-mapping). The sounding result of this match is mathematical sonification.		When pitch, intensity, timbre, rhythm (if any), and duration as sound-characteristics, runs through a series of data-measurements connected to a physical term, or a scientific concept, they form a logical map of one or more parts of that series (direct data-mapping). The sounding result of this match is mathematical sonification.

Line 31:		Line 31:
	To understand the difference between symbolic and mathematical representation, we can adapt the previous examples as “unplugged activities” in a classroom. Mathematical sonification in the cloud example would occur if we defined a color threshold for white or gray and represented the droplets that make up the clouds with millions of frequency particles of minimal duration (sound nebulae) the droplets of which clouds are composed. In the example of rain, we would have a mathematical sonification if students represented with absolute precision, one by one, every raindrop at a specific time and surface area. Finally, in the example of “parking,” we would have symbolic representation if the students’ eyes took on the role of the sensor, where data would be estimated visually without absolute mathematical measurement.		To understand the difference between symbolic and mathematical representation, we can adapt the previous examples as “unplugged activities” in a classroom. Mathematical sonification in the cloud example would occur if we defined a color threshold for white or gray and represented the droplets that make up the clouds with millions of frequency particles of minimal duration (sound nebulae) the droplets of which clouds are composed. In the example of rain, we would have a mathematical sonification if students represented with absolute precision, one by one, every raindrop at a specific time and surface area. Finally, in the example of “parking,” we would have symbolic representation if the students’ eyes took on the role of the sensor, where data would be estimated visually without absolute mathematical measurement.

			==Adaptive Sonification==

	~~==Adaptive Sonification==~~
	It is a sound design or musical composition (by expanding this notion), resulting from mathematical sonification in which, however, methods of aesthetic sound-rendering are creatively utilized to meet teaching objectives in describing learning concepts.		It is a sound design or musical composition (by expanding this notion), resulting from mathematical sonification in which, however, methods of aesthetic sound-rendering are creatively utilized to meet teaching objectives in describing learning concepts.

Line 40:		Line 40:

	==THE MIDI protocol. Why is it useful for sonification in school?==		==THE MIDI protocol. Why is it useful for sonification in school?==

	MIDI Protocol stands for Musical Instrument Digital Interface and was introduced in early ’80s as machine language allowing analog and later digital instruments interconnection. This language interprets several aspects of music performance and notation in an electronic format.		MIDI Protocol stands for Musical Instrument Digital Interface and was introduced in early ’80s as machine language allowing analog and later digital instruments interconnection. This language interprets several aspects of music performance and notation in an electronic format.

Line 46:		Line 47:

	==Sonification components==		==Sonification components==

	A sonification activity consists in the design and building of a sonification system. A sonification system can be accomplished in many different ways but 3 components must always be considered:		A sonification activity consists in the design and building of a sonification system. A sonification system can be accomplished in many different ways but 3 components must always be considered:

Line 89:		Line 91:

	== Audio Output ==		== Audio Output ==



	The output sound of the system will be the first characteristic to be perceived by a user. It is its signature, its flavor. It will interact with the user’s taste and we must be aware of that. It is the auditive wrapping to be perceived by an audience and, as studies on sound perception show, it will immediately and unconsciously provoke a good or bad sensation to the listener. We should therefore get used to producing “nice” sound outputs with the device that will be used, be it a microcontroller buzzer or a pc virtual synthesizer or a DAW (Digital Audio Workstation) connected to speakers. We should practice some music, or at least make some noise!		The output sound of the system will be the first characteristic to be perceived by a user. It is its signature, its flavor. It will interact with the user’s taste and we must be aware of that. It is the auditive wrapping to be perceived by an audience and, as studies on sound perception show, it will immediately and unconsciously provoke a good or bad sensation to the listener. We should therefore get used to producing “nice” sound outputs with the device that will be used, be it a microcontroller buzzer or a pc virtual synthesizer or a DAW (Digital Audio Workstation) connected to speakers. We should practice some music, or at least make some noise!
Line 142:		Line 142:
	However, Soundscapes project encourages every approach on sonification if it satisfies the creator's inspiration or cultural demands as well as the aesthetical or informative needs of the audience, or the target group it is addressed to.		However, Soundscapes project encourages every approach on sonification if it satisfies the creator's inspiration or cultural demands as well as the aesthetical or informative needs of the audience, or the target group it is addressed to.

			In the following pages, practical ways to implement the above approaches with or without handling data sets coming either from measurements or from sensors, are entitled as: '''[[Special:MyLanguage/Unplugged activities\|Unplugged activities]], [[Special:MyLanguage/Real-time sonification\|Real-time sonification]] and [[Special:MyLanguage/''a posteriori'' sonification\|''a posteriori'' sonification]]'''.

	In the following pages, practical ways to implement the above approaches with or without handling data sets coming either from measurements or from sensors, are entitled as: '''[[Unplugged activities]], [[Real-time sonification]] and [[''a posteriori'' sonification]]'''.		==References==

	~~==References==~~		</translate>

David Sousa: Removed page from translation

2026-04-06T15:02:14Z

Removed page from translation

Show changes

David Sousa at 14:46, 6 April 2026

2026-04-06T14:46:02Z

← Older revision		Revision as of 14:46, 6 April 2026
Line 123:		Line 123:

	<!--T:44-->		<!--T:44-->
	Our sense of hearing is able to focus on a particular sound in between many others (see the “cocktail party effect”) (Arons, B., ~~1992~~) based on timbre. Our auditory system can process information at a far higher rate than our visual system. For example, while video typically updates at 60 frames per second (60 Hz), standard audio is sampled at 44,100 times per second (44.1 kHz). This means that even a single, brief spike in an audio signal—lasting just one sample—is instantly perceived as a distinct "click." As a result, hearing allows us to monitor multiple layers of information simultaneously, often more efficiently than through visual perception alone~~. (~~Kramer, G. et al., ~~1999~~).		Our sense of hearing is able to focus on a particular sound in between many others (see the “cocktail party effect”) <ref>Arons, B. (1992). A review of the cocktail party effect. Journal of the American Voice I/O society, 12(7), 35-50.</ref> based on timbre. Our auditory system can process information at a far higher rate than our visual system. For example, while video typically updates at 60 frames per second (60 Hz), standard audio is sampled at 44,100 times per second (44.1 kHz). This means that even a single, brief spike in an audio signal—lasting just one sample—is instantly perceived as a distinct "click." As a result, hearing allows us to monitor multiple layers of information simultaneously, often more efficiently than through visual perception alone <ref>Kramer, G., Walker, B. N., Bonebright, T., Cook, P., Flowers, J., Miner, N., et al. (1999). The Sonification Report: Status of the Field and Research Agenda. Report prepared for the National Science Foundation by members of the International Community for Auditory Display. Santa Fe, NM: International Community for Auditory Display (ICAD).</ref>.

	== Audio Output == <!--T:10-->		== Audio Output == <!--T:10-->

David Sousa: Marked this version for translation

2026-04-06T12:01:56Z

Marked this version for translation

← Older revision		Revision as of 12:01, 6 April 2026
Line 56:		Line 56:
	This adaptable approach broadens access to the auditory outcome of data sonification across a wide range of age groups and grade levels, inviting educators from other disciplines—such as Art, Theater, and Music, to actively participate in interdisciplinary teaching. An example of this approach has been implemented in the "Sounds of the Stars" scenario <ref>https://soundscapes.nuclio.org/wp-content/uploads/2026/03/Sounds-of-the-Stars-A-SoundScapes-Scenario.pdf</ref> in collaboration with the National Observatory of Athens (community: Ήχοι των Άστρων<ref>https://www.schoolofthefuture.eu/en/community/oi-ihoi-ton-astron</ref>). The scenario is part of the SoundScapes learning scenarios repository <ref>https://soundscapes.nuclio.org/index.php/344-2/</ref>.		This adaptable approach broadens access to the auditory outcome of data sonification across a wide range of age groups and grade levels, inviting educators from other disciplines—such as Art, Theater, and Music, to actively participate in interdisciplinary teaching. An example of this approach has been implemented in the "Sounds of the Stars" scenario <ref>https://soundscapes.nuclio.org/wp-content/uploads/2026/03/Sounds-of-the-Stars-A-SoundScapes-Scenario.pdf</ref> in collaboration with the National Observatory of Athens (community: Ήχοι των Άστρων<ref>https://www.schoolofthefuture.eu/en/community/oi-ihoi-ton-astron</ref>). The scenario is part of the SoundScapes learning scenarios repository <ref>https://soundscapes.nuclio.org/index.php/344-2/</ref>.

			<!--T:25-->
	==THE MIDI protocol. Why is it useful for sonification in school?==		==THE MIDI protocol. Why is it useful for sonification in school?==
	MIDI Protocol stands for Musical Instrument Digital Interface and was introduced in early ’80s as machine language allowing analog and later digital instruments interconnection. This language interprets several aspects of music performance and notation in an electronic format.		MIDI Protocol stands for Musical Instrument Digital Interface and was introduced in early ’80s as machine language allowing analog and later digital instruments interconnection. This language interprets several aspects of music performance and notation in an electronic format.
Line 63:		Line 64:
	However, it is the ability to edit the output as a musical score or as a part of a polyphonic composition that makes MIDI an exceptionally powerful educational tool. Within the present WIKI pages sensors using MIDI in particular, are widely displayed.		However, it is the ability to edit the output as a musical score or as a part of a polyphonic composition that makes MIDI an exceptionally powerful educational tool. Within the present WIKI pages sensors using MIDI in particular, are widely displayed.

			<!--T:26-->
	==Sonification components==		==Sonification components==
	A sonification activity consists in the design and building of a sonification system. A sonification system can be accomplished in many different ways but 3 components must always be considered:		A sonification activity consists in the design and building of a sonification system. A sonification system can be accomplished in many different ways but 3 components must always be considered:

			<!--T:27-->
	1) INPUT DATA;		1) INPUT DATA;

			<!--T:28-->
	2) MAPPING PROTOCOL;		2) MAPPING PROTOCOL;

			<!--T:29-->
	3) AUDIO OUTPUT;		3) AUDIO OUTPUT;

	== Input Data == <!--T:8-->		== Input Data == <!--T:8-->

			<!--T:30-->
	In a sonification system, which is our final product, the data is the source of the sound engine, and some particular sounds will be the output. The inputs and outputs are mapped onto each other following a protocol that establishes which sounds are played according to which data. So first we need to know and understand the data we want to sonify. We must know what we want to say with our system - what we will talk about. We must know how the data change (usually we have time based data but there can also be spatially referenced data, like maps) and what characteristics of its behavior we want to represent. For example if you have a single value (like luminosity of a star, linear position of a car, amount of likes in a youtube channel, number of new posts on wikipedia, etc) you can choose to play a sound when this value is more than a certain threshold value, or play a sound that gets louder when the values becomes higher, or a sound when the values are raising or decreasing in time. In some cases it is useful to determine the highest and the lowest value within the whole range of values available. In terms of outputs this can help define a “container” of initial values that can define the range of deviations in the output. We can highlight certain features of data. There are many types of data. The most common are:		In a sonification system, which is our final product, the data is the source of the sound engine, and some particular sounds will be the output. The inputs and outputs are mapped onto each other following a protocol that establishes which sounds are played according to which data. So first we need to know and understand the data we want to sonify. We must know what we want to say with our system - what we will talk about. We must know how the data change (usually we have time based data but there can also be spatially referenced data, like maps) and what characteristics of its behavior we want to represent. For example if you have a single value (like luminosity of a star, linear position of a car, amount of likes in a youtube channel, number of new posts on wikipedia, etc) you can choose to play a sound when this value is more than a certain threshold value, or play a sound that gets louder when the values becomes higher, or a sound when the values are raising or decreasing in time. In some cases it is useful to determine the highest and the lowest value within the whole range of values available. In terms of outputs this can help define a “container” of initial values that can define the range of deviations in the output. We can highlight certain features of data. There are many types of data. The most common are:

			<!--T:31-->
	'''Single data:''' indicating a state ON-OFF (boolean data).		'''Single data:''' indicating a state ON-OFF (boolean data).

			<!--T:32-->
	'''A single data value covering a range of values:''' usually mapped to a single sound or sound feature like the pitch, or bpm (beats per minute), or an effect, but it can control more than one feature or sound at once.		'''A single data value covering a range of values:''' usually mapped to a single sound or sound feature like the pitch, or bpm (beats per minute), or an effect, but it can control more than one feature or sound at once.

			<!--T:33-->
	'''Multiple data:''' more than one data of the previous type. Usually there are many types of data collected at the same time so these data sets consist of several layers of synchronized data.		'''Multiple data:''' more than one data of the previous type. Usually there are many types of data collected at the same time so these data sets consist of several layers of synchronized data.

			<!--T:34-->
	Sound has the advantage over visual perception that more layers of data can be perceived at the same time. Changes in patterns are more easily detected listening than looking at. Especially if the amount of data is very large. So, in sum, we need to consider the data we have, how they evolve in time, how they are arranged and what are the salient parts we want to use to feed our sonification system. We have to ask ourselves “what will the sound mean?” We need to understand that data is not the message! We must metabolize the data and their behavior and find what message will be triggering sound.		Sound has the advantage over visual perception that more layers of data can be perceived at the same time. Changes in patterns are more easily detected listening than looking at. Especially if the amount of data is very large. So, in sum, we need to consider the data we have, how they evolve in time, how they are arranged and what are the salient parts we want to use to feed our sonification system. We have to ask ourselves “what will the sound mean?” We need to understand that data is not the message! We must metabolize the data and their behavior and find what message will be triggering sound.

			<!--T:35-->
	And, therefore, before this we need to ask ourselves what is the purpose of the sonification? Will it be applied continuously, maybe in the background, or just after some time of collecting data, or both?		And, therefore, before this we need to ask ourselves what is the purpose of the sonification? Will it be applied continuously, maybe in the background, or just after some time of collecting data, or both?

	===Real-Time Sonification vs “A Posteriori”===		===Real-Time Sonification vs “A Posteriori”=== <!--T:36-->

			<!--T:37-->
	Acording to the use of the sonification system (to analyze or to monitor a certain phenomena) we distinguish two “modes”:		Acording to the use of the sonification system (to analyze or to monitor a certain phenomena) we distinguish two “modes”:

			<!--T:38-->
	'''Real-time (to monitor)''' - a stream of data is sonifed instantly and a sound is produced to display the value and behavior of the data in that particular moment;		'''Real-time (to monitor)''' - a stream of data is sonifed instantly and a sound is produced to display the value and behavior of the data in that particular moment;

			<!--T:39-->
	'''“A posteriori” (to analyze)''' - time-series sonification of a set of pre-recorded data is converted into an audio file that displays the values and behavior of the data over the period of time covered by the time-series.		'''“A posteriori” (to analyze)''' - time-series sonification of a set of pre-recorded data is converted into an audio file that displays the values and behavior of the data over the period of time covered by the time-series.

			<!--T:40-->
	These two methods are not mutually exclusive and can eventually display the same sounds. The difference is that in an “a posteriori” sonification, because the sound is produced after the events that originated the data, the parameters of the final piece can be adapted, i.e. the total duration. In a real-time case, you can control the time resolution: that is the time interval at which the sound can change and is played.		These two methods are not mutually exclusive and can eventually display the same sounds. The difference is that in an “a posteriori” sonification, because the sound is produced after the events that originated the data, the parameters of the final piece can be adapted, i.e. the total duration. In a real-time case, you can control the time resolution: that is the time interval at which the sound can change and is played.

	== Mapping Protocol == <!--T:9-->		== Mapping Protocol == <!--T:9-->

			<!--T:41-->
	The mapping protocol is the core of the sonification system. This is where knowledge of input data must be combined with creativity. According to his/her educational needs, the creator of the sonification system makes choices based on his/her character and artistic taste in translating data sets into sound pieces. The mapping protocol is the process or algorithm or function that associates particular sounds to defined data. It is the set of rules by which output sounds correspond to input data. A simple mapping can consist for example in a direct one-to-one correspondence between each value of an input data to a parameter of an output sound, like the pitch. This component of the system is key because here is where the designer of the system selects certain features of the data to be played in a particular manner, in order to highlight them, or not.		The mapping protocol is the core of the sonification system. This is where knowledge of input data must be combined with creativity. According to his/her educational needs, the creator of the sonification system makes choices based on his/her character and artistic taste in translating data sets into sound pieces. The mapping protocol is the process or algorithm or function that associates particular sounds to defined data. It is the set of rules by which output sounds correspond to input data. A simple mapping can consist for example in a direct one-to-one correspondence between each value of an input data to a parameter of an output sound, like the pitch. This component of the system is key because here is where the designer of the system selects certain features of the data to be played in a particular manner, in order to highlight them, or not.

			<!--T:42-->
	So this mapping consists in associating certain data aspects to different auditory parameters, such as pitch, loudness, timbre, and rhythm. For example, the amplitude of a sound can be mapped to the value of a light resistor, or the frequency of a sound can be mapped to the rate of change of the sea level (tides).		So this mapping consists in associating certain data aspects to different auditory parameters, such as pitch, loudness, timbre, and rhythm. For example, the amplitude of a sound can be mapped to the value of a light resistor, or the frequency of a sound can be mapped to the rate of change of the sea level (tides).

			<!--T:43-->
	Usually the tendency is to map a single feature of the data to a single parameter of output sound but we humans are generally more capable of perceiving differences in sound if such differences manifest concurrently through different properties. So it is not a bad idea to map the same variable onto different psychoacoustic properties of a sound (pitch and volume as an example of the most evident) if we want to emphasize its change and dynamics.		Usually the tendency is to map a single feature of the data to a single parameter of output sound but we humans are generally more capable of perceiving differences in sound if such differences manifest concurrently through different properties. So it is not a bad idea to map the same variable onto different psychoacoustic properties of a sound (pitch and volume as an example of the most evident) if we want to emphasize its change and dynamics.

			<!--T:44-->
	Our sense of hearing is able to focus on a particular sound in between many others (see the “cocktail party effect”) (Arons, B., 1992) based on timbre. Our auditory system can process information at a far higher rate than our visual system. For example, while video typically updates at 60 frames per second (60 Hz), standard audio is sampled at 44,100 times per second (44.1 kHz). This means that even a single, brief spike in an audio signal—lasting just one sample—is instantly perceived as a distinct "click." As a result, hearing allows us to monitor multiple layers of information simultaneously, often more efficiently than through visual perception alone. (Kramer, G. et al., 1999).		Our sense of hearing is able to focus on a particular sound in between many others (see the “cocktail party effect”) (Arons, B., 1992) based on timbre. Our auditory system can process information at a far higher rate than our visual system. For example, while video typically updates at 60 frames per second (60 Hz), standard audio is sampled at 44,100 times per second (44.1 kHz). This means that even a single, brief spike in an audio signal—lasting just one sample—is instantly perceived as a distinct "click." As a result, hearing allows us to monitor multiple layers of information simultaneously, often more efficiently than through visual perception alone. (Kramer, G. et al., 1999).

David Sousa: /* Quality of Output */

2026-04-06T12:01:01Z

Quality of Output

← Older revision		Revision as of 12:01, 6 April 2026
Line 162:		Line 162:

	<!--T:23-->		<!--T:23-->

			In the following pages, practical ways to implement the above approaches with or without handling data sets coming either from measurements or from sensors, are entitled as: '''[[Unplugged activities]], [[Real-time sonification]] and [[''a posteriori'' sonification]]'''.

	==References==		==References==

David Sousa: /* Adaptive Sonification */

2026-04-06T12:00:43Z

Adaptive Sonification

← Older revision		Revision as of 12:00, 6 April 2026
Line 56:		Line 56:
	This adaptable approach broadens access to the auditory outcome of data sonification across a wide range of age groups and grade levels, inviting educators from other disciplines—such as Art, Theater, and Music, to actively participate in interdisciplinary teaching. An example of this approach has been implemented in the "Sounds of the Stars" scenario <ref>https://soundscapes.nuclio.org/wp-content/uploads/2026/03/Sounds-of-the-Stars-A-SoundScapes-Scenario.pdf</ref> in collaboration with the National Observatory of Athens (community: Ήχοι των Άστρων<ref>https://www.schoolofthefuture.eu/en/community/oi-ihoi-ton-astron</ref>). The scenario is part of the SoundScapes learning scenarios repository <ref>https://soundscapes.nuclio.org/index.php/344-2/</ref>.		This adaptable approach broadens access to the auditory outcome of data sonification across a wide range of age groups and grade levels, inviting educators from other disciplines—such as Art, Theater, and Music, to actively participate in interdisciplinary teaching. An example of this approach has been implemented in the "Sounds of the Stars" scenario <ref>https://soundscapes.nuclio.org/wp-content/uploads/2026/03/Sounds-of-the-Stars-A-SoundScapes-Scenario.pdf</ref> in collaboration with the National Observatory of Athens (community: Ήχοι των Άστρων<ref>https://www.schoolofthefuture.eu/en/community/oi-ihoi-ton-astron</ref>). The scenario is part of the SoundScapes learning scenarios repository <ref>https://soundscapes.nuclio.org/index.php/344-2/</ref>.

	~~<!--T:24-->~~
	In the following pages, practical ways to implement the above approaches with or without handling data sets coming either from measurements or from sensors, are entitled as: '''[[Unplugged activities]], [[Real-time sonification]] and [[''a posteriori'' sonification]]'''.

	~~<!--T:6-->~~
	==THE MIDI protocol. Why is it useful for sonification in school?==		==THE MIDI protocol. Why is it useful for sonification in school?==
	MIDI Protocol stands for Musical Instrument Digital Interface and was introduced in early ’80s as machine language allowing analog and later digital instruments interconnection. This language interprets several aspects of music performance and notation in an electronic format.		MIDI Protocol stands for Musical Instrument Digital Interface and was introduced in early ’80s as machine language allowing analog and later digital instruments interconnection. This language interprets several aspects of music performance and notation in an electronic format.

David Sousa: /* Quality of Output */

2026-04-06T11:59:22Z

Quality of Output

← Older revision		Revision as of 11:59, 6 April 2026
Line 161:		Line 161:
	'''Musical Quality'''		'''Musical Quality'''

	The designer should consider what type of narrative he/she is inducing in the listener. That means for example using low and scary sounds to represent parameters of global warming (A Song of Our Warming Planet or The sound of climate change from the Amazon to the Arctic ). As we want to stimulate the user to pay attention to our system output it can also be useful to have a survey about what type of music the listener appreciates. A generally and initially acceptable musical sound, with the least possible chance of being rejected by the majority of recipients, would be the one that would obey the fundamental principles of symmetry and proportion, as these have shaped our common perception of “music" in today's world.		The designer should consider what type of narrative he/she is inducing in the listener. That means for example using low and scary sounds to represent parameters of global warming ([https://youtu.be/5t08CLczdK4?si=dLNDaHfCRrG-5Y-6 A Song of Our Warming Planet] or [https://youtu.be/-V2Uc8Kax_g?si=YmgaJK3IlpmExpZm The sound of climate change from the Amazon to the Arctic]). As we want to stimulate the user to pay attention to our system output it can also be useful to have a survey about what type of music the listener appreciates. A generally and initially acceptable musical sound, with the least possible chance of being rejected by the majority of recipients, would be the one that would obey the fundamental principles of symmetry and proportion, as these have shaped our common perception of “music" in today's world.

	However, Soundscapes project encourages every approach on sonification if it satisfies the creator's inspiration or cultural demands as well as the aesthetical or informative needs of the audience, or the target group it is addressed to.		However, Soundscapes project encourages every approach on sonification if it satisfies the creator's inspiration or cultural demands as well as the aesthetical or informative needs of the audience, or the target group it is addressed to.

David Sousa: /* Music and Sound: Basic Concepts */

2026-04-06T11:58:11Z

Music and Sound: Basic Concepts

← Older revision		Revision as of 11:58, 6 April 2026
Line 137:		Line 137:
	'''Duration:''' How long each sound lasts.		'''Duration:''' How long each sound lasts.

	'''Rhythm:''' How frequently the sounds repeat and in what pattern. For example, a metronome is a device that produces short, evenly spaced sounds at a set number of beats per minute (BPM). Other devices use this characteristic as a sonification output (Geiger counter - Wikipedia) and parking devices for cars.		'''Rhythm:''' How frequently the sounds repeat and in what pattern. For example, a metronome is a device that produces short, evenly spaced sounds at a set number of beats per minute (BPM). Other devices use this characteristic as a sonification output ([https://en.wikipedia.org/wiki/Geiger_counter Geiger counter - Wikipedia]) and parking devices for cars.

	'''3D Positioning:''' The position of a sound source in space - for example if the sound comes from the left or right speaker in a stereo system. Far more complex but basically the same concept, are the surround systems 5.1 or 7.1 up to ambisonic systems where the position of the sound source can be even more detailed by using multiple channels (Ambisonic reproduction systems - Wikipedia)		'''3D Positioning:''' The position of a sound source in space - for example if the sound comes from the left or right speaker in a stereo system. Far more complex but basically the same concept, are the surround systems 5.1 or 7.1 up to ambisonic systems where the position of the sound source can be even more detailed by using multiple channels ([https://en.wikipedia.org/wiki/Ambisonic_reproduction_systems Ambisonic reproduction systems - Wikipedia])

	=== Context is important ===		=== Context is important ===

David Sousa at 11:55, 6 April 2026

2026-04-06T11:55:53Z

← Older revision		Revision as of 11:55, 6 April 2026
Line 114:		Line 114:

	</translate>		</translate>

	~~== Audio Output == <!--T:10-->~~

	The output sound of the system will be the first characteristic to be perceived by a user. It is its signature, its flavor. It will interact with the user’s taste and we must be aware of that. It is the auditive wrapping to be perceived by an audience and, as studies on sound perception show, it will immediately and unconsciously provoke a good or bad sensation to the listener. We should therefore get used to producing “nice” sound outputs with the device that will be used, be it a microcontroller buzzer or a pc virtual synthesizer or a DAW (Digital Audio Workstation) connected to speakers. We should practice some music, or at least make some noise!		The output sound of the system will be the first characteristic to be perceived by a user. It is its signature, its flavor. It will interact with the user’s taste and we must be aware of that. It is the auditive wrapping to be perceived by an audience and, as studies on sound perception show, it will immediately and unconsciously provoke a good or bad sensation to the listener. We should therefore get used to producing “nice” sound outputs with the device that will be used, be it a microcontroller buzzer or a pc virtual synthesizer or a DAW (Digital Audio Workstation) connected to speakers. We should practice some music, or at least make some noise!